Saturday, January 21, 2012

Pre-Painted Arkham Horror Minis

Tuesday, January 17, 2012

Complete Monstrous Manual Online

OK, this is useful, but who knows how long it will stay online.

Complete Monstrous Manual Online

Labels:

Sunday, May 09, 2010

Deep Rothe

I have always wanted a herd of Deep Rothe ever since I started reading the Drizzt books so long ago. The current NWN2 computer game shows them as really big cattle, and it is true that they are described in the back of the 2E book Drow of the Underdark as being like musk oxen, but they are also listed as being 4' tall. A four foot tall musk ox would look pretty silly. (I'm also re-reading the Drizzt books, and when he is on the Isle of Roethe, Salvatore describes them as coming up to between the knee and the waist.)

In my mind, they were always a little more like big horn sheep, so when a search for miniature musk oxen in any scale turned up zip, I did a web search for 25mm Big Horn Sheep. The best I found are an accessory for the Aegyptian line of War Gods minis from Crocodile Games. I got the minis six months ago...ordered them while I was in North Dakota over Christmas. I got six of them, two of each type available.

This is the conversion process:

First, take the mini and remove all flashing.

The next step in the conversion process is to roll out some brown stuff in a very small quantity and then spread it out thin like a pancake. Once you have a nice piece, press it to the side of the mini like you're putting a coat on it.

I want to say again how useful the 1.5x reading glasses are when working with minis. I got amazing detail as I pressed the Xacto blade into the brownstuff to furhter adhere it and also to create the thick hair of the creature.
The hardest part about working with brown or green stuff is cultivating patience. You really need to work with small sections and not mess around with it until it is hard. That is about 24 hours. When it is hard, you can add the next little section and sculpt detail without screwing up the work you did earlier. It takes a lot of time. I am not very patient, but I'm learning. Also, be very careful, but it is important to wet your xacto blade frequently so that the brown stuff does not stick to the blade and pull away from the mini. I've seen people use a small sponge in water, KY jelly, and other lubricants, but I think spit is the best and if you are careful, licking the blade is pretty good--it is what I do.
To encourage patience, it is a good idea to work on several miniatures at once. That way while one mini is hardening you can be distracting yourself by working on another one.

Or two.

Or six.

Finally, the minis are done and ready for painting. Again, I go back to the Compendium sheet to re-read the description and then get to work with my Reaper paints. These don't need a lot of detailed painting, so it goes pretty quickly. I used Woodstain Brown for the fur and Dove Gray for the horns. Black for the hooves and I also painted the snout like a cow's instead of like a goat, to make it seem a little more like the bovine aspects of the musk ox. Then the whole thing gets a thin black wash.

Labels: , ,

Ashcrawler

In my never ending quest to have all the monsters, I was working on the Excel Spreadsheet I've been compiling of every monster reference in my home gaming library so that I can quickly find which book any given monster is described in.

I was going through the Creature Catalogue (TSR) and noticed the Ash Crawler, and thought that the Massiff Star Wars Mini might work as a proxy for it.
The description says the Ash Crawler needs a tail, and this mini looks like it needs one too, so I whipped out the brown stuff and added the tail.

This is not much of a sculpting job, I realize, but that's exactly why you look for proxies that are very close to what you're after so you don't need to do a lot of detailed sculpting. Once I had the tail on and patiently waited for it to harden, I read the descriptions for the creature in the Creature Catalogue, and then looked at the 2E version in the Mystara Monstrous Compendium Annual.
I painted a base coat of Reaper Pro Paint Dove Gray and let that dry. Then I gave it a light wash with watered down Reaper Master Series Woodstain Brown. I painted the eyes red, because that was handy and it looked nice and I had extra after I painted the tongue. When it was all dry, I put black dots on the eyes, painted the hight lights with more of the Dove Gray and then added a few Stormy Gray shadows (Reaper Master Series).

Lastly, I touched up the base with Reaper Master Series Pure Black.
I like a glossy varnish on the minis, rather than dullcote or matte. I think because when we were painting minis back when I was a kid, we all used Testor's Enamal so even though I'm painting in acrylics now, I still don't think they look right without the shiny top coat. Everyone says I'm crazy, which I do not contest, but I have started photographing my minis before I put the sealer on them, just to avoid reflecting the flash and deflecting the negative comments from my pro friends at Reaper.

Labels: , ,

Spriggan


The Spriggan is an interesting monster that is a bit like a dwarf, but has the growth capabilities of the Duergar.

Here is my repaint creating that creature...because, I need to have all the monsters.

See MC Compendium 5: Greyhawk Adventures for full stats and info.

Labels: ,

Hellstinger Scorpion

CLIMATE/TERRAIN: Native to Third and Fourth layers of the Nine Hells, where it is common, but can be found in desert ruins on Prime Material
FREQUENCY: Very Rare
ORGANIZATION: Solitary
ACTIVITY CYCLE: Any
DIET: Carnivore
INTELLIGENCE: Animal (1)
TREASURE: Nil or incidental in lair
ALIGNMENT: Neutral Evil
NO. APPEARING: 1-35 (1)
ARMOR CLASS: 6
MOVEMENT: 18
HIT DICE: 13
THAC0: 7
NO. OF ATTACKS: 3
DAMAGE/ATTACK: 2d6+4/2d6+4/1d8+4 (+fire damage from claw and venom)
SPECIAL ATTACKS: Hellish Sting, Fire Claw
SPECIAL DEFENSES: Immune to poison and heat/fire damage
MAGIC RESISTANCE: 15%
SIZE: L
MORALE: Steady (12)
XP VALUE: 8,000

Hellstinger scorpions are vicious predators that are native to the third and fourth layers of the Nine Hells, however at some point it is believed that an evil priest gated in hundreds of these creatures as part of an arcane ritual and the hellstingers flourished in Toril’s deserts, especially Anauroch. They look and behave very similarly to giant scorpions, but are immediately recognizable as extra-planar in origin by their searing heat radiating from their red-hot claws.

The hellstinger scorpion has a red carapace, legs and claws. The segmented tail is orange, with a vicious stinger on the end. There is a bitter smell associated with the scorpion, which probably comes from the venom. They make an unnerving scrabbling sound as they travel across rocky terrain.

Combat: The hellfire scorpion is 95% likely to attack any creature that approaches. Scorpions of any variety do not use visual or aural senses to detect prey. Instead they use the vibrations of the sand underneath them. Small sensors on their legs pick up and measure the strength of the vibrations, using the minute differences in the vibrations detected by each leg to locate the prey. Hence, the scorpion can detect your presence even if it isn’t looking at you or you are invisible. When it determines the location and distance of the prey, it calculates when the prey is within sufficient range to attack in a single rushed charge with pincers extended. It will remain motionless until this attack, and players must make a roll for surprise when it does. The scorpion can sense these vibrations up to a distance of 3 times that of its length. (Giant: 9’; Monstrous: 45’) Scorpions have the same limitations on attacking and moving that characters and NPCs do, in that they can not move more than 1/2 of their max movement in one round and still attack. Tunneling under a scorpion also does not protect from detection, unless the tunnel is so deep it is beyond the range of detectable vibration. Therefore, the scorpion is almost impossible to surprise by any attacker who travels on or below the ground.

An injured scorpion which is missing legs will suffer a 10% penalty on its detection roll for each leg that it is missing or crippled. If several adjacent legs are missing or damaged, the scorpion will not be able to detect motion in that quadrant.

The creature has a hellishly hard, chitinous carapace that gives it Armor Class –4. This monster attacks by grabbing prey with its two huge pincers, inflicting 2d6 points of damage each +4 points of heat damage, while it lashes forward with its tail to sting. Thus, it can fight three opponents at once. If a hellfire scorpion manages to grab a victim in a pincer, it will automatically inflict 2d6+4 points of damage each round until it releases the victim. If the sting is employed against an un-trapped victim, an attack roll is required for a successful attack, but a trapped character is automatically struck by any sting attack directed at him with no attack roll required. The victim has but one chance to escape. If he can make his bend bars/lift gates roll, he will escape the claw. However, this can be the character's only action that round and it can be tried only once per combat. If the victim escapes, however, it will automatically be stung without chance to miss by the reactive sting of the hellfire scorpion.

The sting inflicts 1d8 points of damage from the poison +4 points of heat damage and the victim must save versus poison or permanently lose one point of Strength. Neutralize Poison will stop the loss of strength and damage, and a point of Strength will be returned each time a full flask of Elixer of Health is imbibed.

Note that this scorpion type is immune to their own poison.

If a hellfire scorpion is reduced to 1 or 2 hit points, it will go into a stinging frenzy, stinging everything in sight, gaining two attempts to hit per round with only the tail. Slain creatures are dragged to the scorpion's burrow to be eaten.

Habitat/Society: Hellstinger scorpions live in underground burrows and ruins found in dry, arid climates. If found in a dungeon, or other subterranean location, the uncharacteristic dryness of the air created by the heat of the creature will be an early clue that something is amiss. Hence, they tend to favor climates where their natural ability to dehumidify does not alert potential prey to avoid them.

Each lair may (20%) have 5d4 scorpion eggs. These beasts eat any living creature that is unfortunate enough to stray too close to their lair. Any treasure found comes from the bodies of human or demi-human victims that have been dragged here to be consumed. Armor is rarely found intact, since the scorpion will surely have used its pincers to cut up its prey.

Ecology: These bizarre insects contribute little to any ecosystem. They themselves are seldom prey for other creatures and so where there is one, there are likely many.

Labels: ,

Saturday, May 08, 2010

Reek (adapted from Star Wars)

CLIMATE/TERRAIN: Underdark
FREQUENCY: Uncommon
ORGANIZATION: Herd
ACTIVITY CYCLE: Any
DIET: Omnivore
INTELLIGENCE: Animal (2-4)
TREASURE: Nil
ALIGNMENT: Chaotic Neutral
NO. APPEARING: 1-6 (3)
ARMOR CLASS: 5
MOVEMENT: 12
HIT DICE: 10
THAC0: 11
NO. OF ATTACKS: 1
DAMAGE/ATTACK: 1d10 (horn), 1d8 (bite), 1d6 (kick)
SPECIAL ATTACKS: Charge and trample
SPECIAL DEFENSES: Nil
MAGIC RESISTANCE: Nil
SIZE: H
MORALE: 8-10
XP VALUE: 1,400

These immense creatures of the Underdark are similar to the surface rhino, but larger and more aggressive. They are primarily herbivores, but plant life in the depths of the Underdark is not abundant. They have adapted, however, to eat whatever food is available and are known to eat meat when no other food is at hand. They like to find mud pools near subterranean water sources, and will wallow for hours. Their horns, though fierce, are not primarily weapons, but are used to knock away stone and dirt to get at insects or plant life in hard to get crannies.

The meat of a Reek is not considered a delicacy, but is nourishing and one can acquire a taste for it, especially if there is little else available. The meat from a single Reek can feed a large number of creatures but they are difficult to capture or domesticate.

Labels: ,

Worm, Runespiral

CLIMATE/TERRAIN: Underdark
FREQUENCY: Very Rare
ORGANIZATION: Hive
ACTIVITY CYCLE: Any
DIET: Carnivore
INTELLIGENCE: High (14)
TREASURE: Incidental
ALIGNMENT: Neutral Evil
NO. APPEARING: 1-25 (5)
ARMOR CLASS: 4
MOVEMENT: 9
HIT DICE: 9
THAC0: 11
NO. OF ATTACKS: 6
DAMAGE/ATTACK: 1d4 x6
SPECIAL ATTACKS: Hive scream
SPECIAL DEFENSES: Confusion
MAGIC RESISTANCE: 50%
SIZE: M
MORALE: Steady (12)
XP VALUE: 6,000

These strange creatures of the deep Underdark live in colonies and seem to have a hive mind, meaning that they are telepathically linked and what one sees, all see. They communicate via this mental link, and so have no use for language. They seem to be able to understand languages of other races, but either do not have the ability to communicate their thoughts to other species or simply have no interest in doing so. Their name comes from their “shell” covering the top or back portion of the creature. It is not really a shell at all, but a semi-transparent sack filled with some sort of fluid that from a distance appears to be a constantly changing series of runes. In reality, they are not runes at all, but some sort of bodily fluids of different colors that are constantly shifting. Mammals find the changing patterns impossible to ignore, and if within 10 feet of the creatures any mammalian creature must save vs. spells or be transfixed for 1d4 rounds. At the end of the effect, another save vs. spell must be made to avoid one of 4 terrible mental effects:
Confusion, as per the spell cast by a 9th level wizard
Sleep as cast by a 9th level wizard
Fear as per the spell cause fear cast by a 9th level wizard
Permanent loss of 1d4 points of Intelligence

Obviously, the effects are negated if there is no light by which to see the runes, or if blinded. Monstrologists believe this is an added protection against creatures in the Underdark who use artificial or natural light. The Runespiral Worm has excellent night vision and are unaffected by their own runes.

Each Runespiral Worm has 6 bladelike appendages on their upper body near the head. These are as deadly as a fighter with 6 shortswords that can be used in a single round. Thus, the creature is as able to defend from the front as they are defended from behind.

Their other defense is a screeching howl which can be used to drown out all other sound (rendering spell casting as ineffective as a globe of silence) and causing actual physical pain to the ears. When one howls, any other worm within 125 feet will also take up the howl, thereby increasing the noise and the damage it causes. No sound but the screeching can be heard within 125 feet of the creatures howling, and those within range suffer deafness for 1d6 rounds per screeching worm, and 1d4 points of damage each round the howling continues. Screeching will continue for 1d12 rounds from the first screech. This defense can only be used once per day.

Labels: ,

Crypt Worm (Ghoul Worm)

CLIMATE/TERRAIN: Any burial ground
FREQUENCY: Very Rare
ORGANIZATION: Solitary
ACTIVITY CYCLE: Any
DIET: Carrion
INTELLIGENCE: Low (3)
TREASURE: Nil
ALIGNMENT: Neutral
NO. APPEARING: 1-2 (4)
ARMOR CLASS: 6
MOVEMENT: 8, Br 4
HIT DICE: 3
THAC0: 17
NO. OF ATTACKS: 2
DAMAGE/ATTACK: 1d6+2 (bite)
SPECIAL ATTACKS: Paralysis
SPECIAL DEFENSES: Stenchcloud
MAGIC RESISTANCE: Nil
SIZE: L
MORALE: Elite (18)
XP VALUE: 420


This horrible worm is blind, but possesses an amazing sense of smell that allows it to detect dead flesh from hundreds of feet away. The creature has a stench cloud defense mechanism, which erupts when it first takes damage, causing an effect identical to the spell of the same name as though cast at 9th level. The creature can only emit a stench cloud once per day.

It also is coated in a slime which causes paralysis, similar to the ghoul touch spell. The creature has two bite attacks per round, but need only roll to hit once. If one hits, both attacks hit, because the mouths are so close together.

Labels: ,

Monday, February 01, 2010

Sharn Scratchbuild

In my never ending quest to have all the monsters, I decided to try my hand at scratchbuilding a Sharn.

I had a bunch of blue plastic gene stealers from Warhammer and noticed that some of the parts might lend themselves well to the conversion.

First I cut the parts off the plastic minis and arranged the ones I needed to use for the conversion.Then I took a little brown stuff and attached the hand and claw tri-arm assemblies and attached two torsos with heads together.

Next, I took the twin torsos and used green stuff to attach an unbent paperclip to it as a skeleton. The wire I attached through a slotta base to the cork I use to hold the sculptures I'm working on. I filled the slot and connected it to the clip using green stuff.


The next step was to attach the arm triads and to begin to build up the body using combinations of brown and green stuff.




The results are pretty good, I think. I wanted to post the images before I did the painting because once the whole thing is painted black there might not be any way to really see the individual parts as reflective of the steps.



Not sure if I will do another one of these, not likely to run more than one sharn at a time. :)

Labels: , ,

Monday, October 26, 2009

Crawler, the Director's Mount


I'd been wondering what to do with the WOTC Gauth for a long time, since it has no resemblence at all to the TSR description of that creature. Ral Partha did a good rendition of it, and I have one of those in my collection already.

The WOTC mini does make a reasonable fascimilie of the description of the Director beholder-kin. It looks like a beholder and has only six eyestalks, so other than not being 8-10 feet in diameter it is pretty good. It even has what looks like little appendages on its chin for holding onto a mount.

The Crawler, which is the Director's mount, is a weird cross between a giant centipede and a spider. I was trying to figure out a way to scratchbuild a mount for the WOTC gauth when I stumbled over the Mage Knight miniature "Thorn Crawler" (available at Troll and Toad for under a dollar, but getting pretty rare).

This creature looks like someone had the TSR crawler in mind when they made it, and then added "thorn" to the name to avoid any cease and desist action from WOTC. It has a centipede body, spirdery legs and eight eyes with spider mandibles.

Perfect!

I might have to break off one of the spikes behind the head so that the WOTC Gauth can fit up there (with a superglue saddle), but since a WOTC Gauth is going for nearly $20 at the same site, I can wait a while before I need to have a mounted director.

Labels: ,

Friday, October 09, 2009

WOTC Ultimate Tyrant



It was always frustrating converting 3E materials to 2E use, but trying to do it with 4E is an exercise in futility.

I'm no stranger to that, and really have no choice but to make some effort to do so since all the WOTC minis will be using their radically changed concepts and structure and I will need to find some way to incorporate the new figures into my campaign world.

An example is the Ultimate Tyrant mini from the Legendary Evils set. In 2E, the terms Ultimate Tyrant and Hive Mother were both used for the same creature. I can't find any mention of Hive Mother in the new 4E MM2. The mini itself looks like The Beholder Formerly Known as Prince, but nothing like the 2E description of a Hive Mother. The old Hive Mother had no eyestalks but did have a full set of eyes set into its body and a much larger mouth with a beak as well as teeth.

In my world, because this thing is so huge and of such a weird color, I am going to use it as the avatar of the Great Mother as described in the Monstrous Arcana supplement I, Tyrant.

Labels: ,

Sunday, December 21, 2008

Stained Glass Golem

Among the many monsters from AD&D that I've long wanted a mini of, there shines brightly the stained glass golem. I've thought about ways I could make one, but recently discovered that there is this miniature from the Dreamblade line.

Night Fusion * Stained-Glass Angel * 9/60 Rare

It is very difficult to find, and extremely expensive, though I did manage to find this one on eBay for under $20 including shipping. Most of the other places wanted two and even three times that.

Anyway, the roster of monsters for which I have minis is growing!

Labels: ,

Sunday, November 11, 2007

DoD Fire Archon

It is no secret that I really was unimpressed with the Desert of Desolation set of miniatures that WOTC recently released. I remember being heartbroken, and that isn't too strong a word, when I found out that WOTC broke its contract with Ral Partha to produce official AD&D miniatures and saw that WOTC was going in the direction of making minis that looked a lot like Warhammer minis--28mm scale, and less realism. This became the industry standard, really, and I did come to embrace the WOTC minis in the DDM plastics line...until this set which represents the new artwork for 4th Edition and DDM 2.0.

There are a few minis in the set that are worth showcasing, though. In 2E there are only 5 types of archons, but 3E and it seems 4E are expanding the archons dramatically. This mini, the Fire Archon, is a little goofy looking. I like what WOTC is doing with their clear plastics, but the Fire Archon looks more comical than menacing.

I finally realized that what made him look so stupid was the size of his weapons. Why a guy made of fire wants to use steel weapons and wear armor, I leave that to the game designers to explain. He has them, its a mini in my collection, and he has to have a place on the shelf...
I cut off the puny little scimitar blades and glued on the blades from some hefty weapons from the Reaper Warlords weapons packs and it instantly went from "meh" to nifty.

All of a sudden instead of having one figure on the shelf because I collect the set, to one i'd like to have a half dozen of or so as guards to some Elemental Wizard's dungeon or something. It was a very easy conversion and i was happy that the glue held the metal to the plastic so well. With the wide variety of weapons in the Reaper packs, I could easily have a dozen of these without repeating the weapon combination.

All that said, however, the Flame Harrower from Dreamblade is a much more dynamic pose for essentially the same monster. The armor is cooler and it makes much more sense that a fire creature would have a flamesword rather than humping around some steel blades...although, I wonder how much extra damage those red-hot steel blades do?

Labels: ,

Thursday, November 08, 2007

WOTC Two-Headed Troll (scratchbuilt)

I call this photo, "Proffit On The March".

For years and years I have been wanting someone, anyone, to make a decent two headed troll. There just aren't any out there. The companies that have tried...Reaper for example, made them look too much like warty ettins and gave them weapons or armor, which didn't look like a troll to me.

WOTC's new set, Desert of Desolation, has a new troll based on the 4th edtion artwork. Pretty much this new artwork and the minis from this set have broken my heart, because this is the first WOTC mini set that I honestly don't give a darn if I collect the entire set or not. I think they suck and may not buy any more DDM minis...not out of protest, but just because I'm not interested anymore in their product line. I know they are toys...but do they have to look like them?

I'll review the set later, if I can muster up that much interest, but probably the best thing about it, in my opinion, is that this new troll really worked as a basis for my own scratch-built two-headed troll. The body was big enough, with broad enough shoulders, and the head sunk low enough on the chest...and its own seperate piece...that I could pop them off and reattach with green stuff very easily.

I'm pretty much thrilled with this mini...though I have a hard time thinking that it justifies the expense of the three cases I bought in order to make it.

Here are some process pics:





Labels: , ,

Tuesday, October 23, 2007

Equines

The equines are a race of beings with a human body but horse's heads. They are the invention of my friend Matt Clark at Reaper. He took some horse heads and attached them to the bodies of some of their Warlord line and the results are pretty impressive.

I haven't quite figured out what to do with them in my world, but he cast a bunch of them for me, so I have to do something. Perhaps they were an experiment by a wizard to see if creatures similarly polymorphed would breed true.

I really do like the way these creatures look, but they must have extremely muscular necks and backs to support the wieght of those heads.

Labels: ,

Monday, October 22, 2007

Clawborn Sorrow

In the Night Below set, WOTC came out with a new monster called the Clawborn Sorrow. I didn't really know what to do with it because it is an Eberron monster. It looks like a cross between a drow and a giant scorpion.

WOTC has really made driders seem like being punished by Lolth for failing her test is more of a blessing than a curse, and then they come out with this thing. I don't really think Lolth's touch is going to bestow scorpion traits when she is the spider queen.

A few couple months before Night Below came out I picked up two minis from ages back (can't remember the company) that I thought I was going to use for Tlincali...but the Tlincali, the Scorpion Man, and the Clawborn Sorrow are all three very distinctly different variations on the same scorpion theme. Tlincali don't have the fore claws, but have human hands. Scorpion Men have human arms and scorption claws. Clawborn Sorrows have no arms, do have scorpion claws, and have drow features instead of human.
These guys were clearly more like the clawborn sorrow than the other scorpion-ish creatures, though they are bald. I painted them up like the clawborn sorrow put out by WOTC.

What is their ecology in my Realms? Good question. I looked at this site, Descent into Darkness, which has developed a lot of information on drow religion.

I've made Lolth's son, Vhaeraun, the patron not only of drow males, but also all those whom Lolth has cast out. In my world there are three types of driders--I won't go into my rant about that--because there are three types of drider minis available. In the original materials, all driders became warriors and lacked any secondary sex characteristics as part of their punishment by Lolth. Because D&D is marketed primarily to teen-age boys and they like nothing so much as boobs, driders started being made with breasts. So, in my world warriors, wizards, and priestesses can all fail Lolth's test and retain their secondary sex characteristics.

Priestesses of Lolth are no longer in her favor, so she wouldn't grant them their spells...but loving the delicious irony of it all, Vhaeraun grants the spells to the fallen priestess and forces them to worship him if they wish to continue casting spells.

The warriors who fail become traditional driders. When they have shown exemplary service to Vhaeraun, he rewards them by transforming them into Clawborn Sorrows. Further exemplary service will result in complete restoration to drow male form and these drow males are his most elite followers.

Or, anyway, that's how it works in my world.

Labels: , ,

Monday, October 08, 2007

Reaper 02544 : Barrow Rats

These nasty specimens were sculpted by Jason Wiebe. They are really excellent giant rats, and compare very favorably to the WOTC dire rats...I don't have a lot of use for dire creatures. In my world, dire creatures all have the same basic ecology:

While no one is certain how dire creatures come to be, whether they emerge from some extra-planer existence, are created by some kind of conjuration or alteration magic, the prevailing theory is that they were once, in fact, normal creatures of their kind but were unusually susceptible to the emanations of evil. This theory has weight given that these types of creatures are almost always encountered in areas where evil rites and magic has been practiced for many years, although it is possible that these creatures are simply drawn to such evil and not created by it. If the theory is true, it is suspected that their solitary nature is a result of having driven off or eaten the other creatures of its kind as the changes were taking place.

Regardless of how these creatures come to be, they are always a sign that not only is there evil in the area in which they are encountered, but that evil is deeply rooted and long-standing, of at least 5 years duration. The greater the number and variety of creatures in an area, correspondingly, the greater the power and scope of the evil.


As a result, I only need one dire creature of any given type.

Giant rats, on the other hand, my sewers need lots and lots of those. These guys are pretty good. The nice thing about them is that their tails are easily bended into a variety of shapes, so although the two basic bodies are going to be the same no matter how many I have, when you see them swarming, and all those tails going every which way...it is truly unsettling.

Labels: , ,

Sunday, October 07, 2007

Reaper 02961 : Angel of Darkness

This miniature is sculpted by Julie Guthrie, is rich in both beauty and detail. I really love this miniature. It is listed as Angel of Darkness on the Online Catalogue, but the package I have says Angel of Shadow. If pressed, go with the product number, that's the same either way.

I plan to use her as a Lantern Archon in my world. I realize that Lantern Archons are just balls of light, but I already have a will-o-wisp figure and the trumpet archon isn't just a trumpet floating around, right? If the trumpet archon can be a green skinned bald angel with a trumpet, then in my world lantern archons are going to be some sort of angel carrying a magical lantern. All the lantern archon powers will be the same, except the rays of light will come from the lantern, and though they will shun combat, my lantern archons will be able to swing a sword when they need to.

Labels: , ,

Saturday, September 15, 2007

Kopru

This is the reason I needed the Kna, who are racial enemies of the Kopru. The Kopru is listed on page 69 of TSR 2501: Mystara Monstrous Compendium Index.

The first time I saw the WOTC Half-Illithid Lizardfolk, I thought how much cooler it would have been if they'd made it a kopru, since that is what it looked like. Here is the WOTC fig:

So, when I got to the Korpu entry in my work on the 2E Monstrous Manual I'm creating, I decided to scartch build the mini myself. Take that, WOTC!

I started by cutting the half-illithid in half...hmmm, something very wrong about how that sounds...and then using a tiny drill bit to make a hole in the torso that I could stick an unbent paperclip into for my skeleton. Then I put the wire in my sculpting block vise and started making green stuff. I should have taken a picture of that first step, but I already had the body made before I remembered that I wanted to.



Then, exercising patience I have had to learn to develop, I let it harden before putting on the remaining flukes. Once it was all hardened, I based it using a plastic slotted base that I put a coat of brown stuff on, using that to attach some cleaned up rocks. The rocks hid a central "pillar" of brown stuff that I used to attach the Korpu to the base. Then, before it hardened, I pushed some lichen into the crevices so that it would stick to and disguise the brown stuff--leaving only the rocks showing.

My sculpting skills are still extremely rudimentary, as are my painting skills, but I'm not out to win any contests...only to have the most complete range of monsters my PCs might face that is possible. Given that standard, I'm very pleased with the results.




Labels: , , ,